In terms of technical performance, the advantages of pneumatic actuators mainly include the following four aspects:
(1) Large load, can adapt to high torque output applications.
(2) Rapid action and quick response.
(3) Good adaptability of the working environment, especially in the harsh working environment such as flammable, explosive, dusty, strong magnetic, radiation and vibration, it is superior to hydraulic, electronic and electrical control.
(4) The motor is easily damaged when the stroke is blocked or the valve stem is tied.
The advantages of electric actuators mainly include:
(1) Compact structure and small size. Compared with pneumatic actuators, electric actuators are relatively simple in structure, and a basic electronic system includes actuators, three-position DPDT switches, fuses and some wires, which are easy to assemble.
(2) The drive source of the electric actuator is very flexible, and the general on-board power supply can meet the needs, while the pneumatic actuator requires an air source and a compression drive device.
(3) The electric actuator has no danger of "air leakage" and has high reliability, while the compressibility of air makes the stability of the pneumatic actuator slightly worse.
(4) There is no need to install and maintain various pneumatic pipelines.
(5) The load can be maintained without power, while pneumatic actuators require continuous pressure supply.
(6) Since no additional pressure device is required, the electric actuator is quieter. Generally, if the pneumatic actuator is under heavy load, a silencer is added.
(7) In pneumatic devices, it is usually necessary to convert electrical signals into gas signals, and then into electrical signals, and the transmission speed is slow, and it is not suitable for complex circuits with too many component stages.
(8) Electric actuators are superior in terms of control accuracy.

In fact, pneumatic and electric systems are not mutually exclusive. Pneumatic actuators can simply achieve fast linear circulation movement, simple structure, convenient maintenance, and can be used in various harsh working environments, such as explosion-proof requirements, dusty or wet working conditions. However, in cases where the forces increase rapidly and precise positioning is required, electric drives with servo motors are advantageous. Electric drives are the best choice for applications that require precise, synchronized operation, adjustable and defined positioning programming, and electric drive systems consisting of servo or stepper motors with closed-loop positioning controllers complement pneumatic systems.
In modern control, various systems are becoming more and more complex and more refined, and it is not a certain drive control technology that can meet the various control functions of the system. Electric actuators are mainly used in applications that require precise control, automation equipment in the flexibility requirements are constantly increasing, the same equipment often requires to adapt to the processing needs of different sizes of workpieces, actuators need to be multi-point positioning control, and to the actuator running speed and torque accurate control or synchronous tracking, these use of traditional pneumatic control is not possible, and electric actuators can easily achieve such control. It can be seen that pneumatic actuators are more suitable for simple motion control, while electric actuators are mostly used in precision motion control occasions.





