Valve Connection Method

Dec 22, 2023

The choice of valve connection method is crucial to the final selection and application of the valve. Different connection methods have different characteristics. A full understanding of the connection methods can help us understand the valve in depth.
Commonly used connection methods: flange connection, clamp connection, butt welding connection, threaded connection, ferrule connection, clamp connection, self-sealing connection, etc.
Looking at the connection methods of these valves, have we all got the full picture?

 

Flange connection: The valve body has flanges on both ends, corresponding to the flanges on the pipeline, and the flanges are installed in the pipeline through bolts. Flange connection is the most commonly used connection form in valves. Flanges include convex surface (RF), flat surface (FF), convex and concave surface (MF), etc.
According to the shape of the joint surface, it can be divided into the following types:
1) Smooth type: used for valves with low pressure. Processing is more convenient
2) Concave-convex type: The working pressure is high and medium-hard washers can be used.
3) Tongue and groove type: Gaskets with larger plastic deformation can be used, which are widely used in corrosive media and have better sealing effects.

4) Trapezoidal groove type: Use oval metal ring as gasket, used for valves with working pressure ≥ 64 kg/cm2, or high temperature valves.
5) Lens type: The gasket is in the shape of a lens and is made of metal. Used for high-pressure valves with working pressure ≥100 kg/cm2, or high-temperature valves.
6) O-ring type: This is a newer flange connection form. It was developed with the emergence of various rubber O-rings. Its sealing effect is more reliable than ordinary flat washers.

 

Clamp connection: The valve is installed between two flanges. There are usually positioning holes on the valve body to facilitate installation and positioning. The valve and the pipes at both ends are directly clamped together with bolts.


Welding connection: Both ends of the valve body are processed into butt welding grooves according to butt welding requirements, which correspond to the welding grooves of the pipeline, and are fixed on the pipeline through welding.


Socket welding connection: Both ends of the valve body are processed according to the requirements of socket welding, and connected to the pipeline through socket welding.


Threaded connection: Threaded connection is a simple connection method often used for small valves. The valve body is processed according to each thread standard, and there are two types of internal threads and external threads. Corresponds to the thread on the pipe.
Threaded connections are divided into two situations:
1) Direct sealing: The internal and external threads directly act as seals. In order to ensure that the joints do not leak, they are often filled with lead oil, linen and polytetrafluoroethylene raw material tapes. Among them, polytetrafluoroethylene raw material tapes are increasingly used. This material has good corrosion resistance and extremely good sealing effect. It is excellent and easy to use and store. When disassembling, it can be completely removed because it is a non-sticky film, which is much superior to lead oil and linen.
2) Indirect sealing: The force of thread tightening is transmitted to the gasket between the two planes, allowing the gasket to act as a seal. There are five categories of commonly used threads: metric ordinary threads; imperial ordinary threads; threaded sealed pipe threads; non-threaded sealed pipe threads; and American standard pipe threads.


Cutting sleeve connection: It has only been developed in my country in recent years. Its connection and sealing principle is that when the nut is tightened, the cutting sleeve is under pressure, causing its blade to bite into the outer wall of the pipe, and the outer cone surface of the cutting sleeve is in contact with the joint under pressure. The internal cone surface is tightly sealed, thus reliably preventing leakage. Such as instrument valves. The advantages of this type of connection are:

1) Small size, light weight, simple structure, easy to disassemble and assemble;
2) Strong connection force, wide range of use, and can withstand high pressure (1000 kg/cm²), high temperature (650℃) and impact vibration;
3) A variety of materials can be selected, suitable for anti-corrosion;
4) The processing accuracy requirements are not high;
5) Easy to install at high altitude. At present, the ferrule connection form has been adopted in some small-diameter valve products in my country.

 

Clamp connection: This is a quick connection method that requires only two bolts and is suitable for low-pressure valves that are frequently disassembled. Such as sanitary valves.

 

Internal self-tightening connection: All the above connection forms use external force to offset the medium pressure and achieve sealing. The following introduces the self-tightening connection form using medium pressure. Its sealing ring is installed on the inner cone at a certain angle with the side facing the medium. The medium pressure is transmitted to the inner cone and then to the sealing ring. On the cone surface at a certain angle, two component forces are generated, one with The center line of the valve body is parallel to the outside, and the other is pressed against the inner wall of the valve body. This latter component is the self-tightening force. The greater the medium pressure, the greater the self-tightening force. Therefore, this connection form is suitable for high-pressure valves. Compared with flange connection, it saves a lot of material and manpower, but it also requires a certain preload force so that it can be used reliably when the pressure in the valve is not high.

Valves made using the self-tightening sealing principle are generally high-pressure valves.

 

There are many other valve connection forms, such as some small valves that do not need to be dismantled and are welded to the pipe; some non-metal valves use socket connections, etc. Valve users should treat it specifically according to the actual situation.


Remark:

1) Various connection methods must refer to corresponding standards. It is necessary to clearly understand the standards required by users to avoid the selected valves being unable to be installed.

2) Usually large-diameter pipes and valves are connected by flange connection, and small-diameter pipes and valves are connected by threaded connection.

 

Send Inquiry