Contact Us

  • Room 607-2, Building 5, Wanda Plaza, No.1188, Yongding Road, Yongzhong Street, Longwan, Wenzhou, Zhejiang, China
  • heyuevalveactuator@gmail.com
  • +86-13486831323

Various connection methods of valves

Aug 24, 2023

1. Flange connection
Flange connection is the most commonly used connection form between valves and pipelines or equipment. It refers to the detachable connection of flanges, gaskets and bolts connected to each other as a combined sealing structure. Pipe flange refers back to the flange used for piping in the pipeline installation, And used on the equipment refers to the inlet and outlet flange of the equipment. The flange connection is easy to use and can withstand greater pressure. Flange connection can be applied to valves of various nominal sizes and nominal pressures, but there are certain restrictions on the operating temperature. In high temperature conditions, the flange connection bolts are prone to creep and cause leakage. The blue connection is recommended to be used at a temperature of ≤350°C.
According to the shape of the joint surface, it can be divided into the following types:
Smooth type: for valves with low pressure. Processing is more convenient
Concave-convex type: high working pressure, medium hard gasket can be used
Mortise and groove type: gaskets with large plastic deformation can be used, widely used in corrosive media, and the sealing effect is better
Trapezoidal groove type: oval metal rings are used as gaskets, used for valves with working pressure ≥ 60kg/cm² or high temperature valves
Lens type: The gasket is in the shape of a lens and made of metal. For high pressure valves or high temperature valves with working pressure ≥ 100 kg/cm2
O-ring type: a newer flange connection form, the sealing effect is more reliable than ordinary flat gaskets

 

2. Clip connection
The connection form that directly clamps the valve and the pipes at both ends with bolts.

 

3. Solder connection
Welding connection refers to a connection form in which the valve body has a welding groove and is connected to the pipeline system by welding.
GB/T 12224, API600, ASME B 16.34 and other standards have made regulations on welding grooves.
The welding connection between the valve and the pipeline is divided into butt welding connection (BW) and socket welding connection (SW). The socket welding end should meet the requirements of JB/T 1751. Butt welding connection (BW) can be applied to various sizes, various pressures and high temperature working conditions, and socket welding connection (SW) is generally suitable for valves ≤ DN50.

 

4. Threaded connection
This is an easy connection method, often used for small valves. There are two situations:
Direct sealing: The internal and external threads directly act as a seal. In order to ensure that the connection does not leak, it is often filled with lead oil, thread hemp and polytetrafluoroethylene raw material tape, among which polytetrafluoroethylene raw material tape is widely used. This material has good corrosion resistance, excellent sealing effect, convenient use and storage, and can be completely removed when disassembling, because it is a non-adhesive film, which is much better than lead oil and thread hemp.
Indirect sealing: The power of thread tightening is transmitted to the gasket on the two planes, so that the gasket acts as a seal.

 

5. Ferrule connection
The working principle of the ferrule connection is that when the nut is tightened, the ferrule is under pressure so that its blade bites into the outer wall of the pipe, and the outer tapered surface of the ferrule is tightly fitted with the conical surface of the joint body under pressure, so it can reliably prevent leakage .
The advantages of this form of connection are:
1) Small size, light weight, simple structure, easy disassembly;
2) Strong connection, wide application range, high pressure (1000 kg/cm2), high temperature (650°C) and shock vibration;
3) A variety of materials can be selected, suitable for anti-corrosion;
4) The processing accuracy is not high;
5) It is convenient for high-altitude installation.

 

6. Clamp connection
This is a quick connection method that requires only two bolts and is suitable for low pressure valves that are often disassembled.

 

7. Internal self-tightening connection
Internal self-tightening connection is a connection form that uses medium pressure for self-tightening. Its sealing ring is installed at the inner cone, and forms a certain angle with the opposite side of the medium. The pressure of the medium is transmitted to the inner cone and then to the sealing ring. On the conical surface at a certain angle, two component forces are generated, one and the other. The center line of the valve body is parallel to the outside, and the other is pressed against the inner wall of the valve body. The latter force is the self-tightening force. The greater the medium pressure, the greater the self-tightening force. So this connection form is suitable for high pressure valves. Compared with flange connection, it saves a lot of material and manpower, but it also requires a certain preload so that it can be used reliably when the pressure in the valve is not high.
Valves made of self-tightening sealing principle are generally high-pressure valves. There are many forms of valve connection, such as some small valves that do not need to be dismantled, welded together with the pipe; some non-metallic valves, using socket connections, and so on. Valve users should be treated according to specific conditions.

 

8. Other
There are many other valve connection forms, such as some small valves that do not need to be dismantled, welded together with the pipe; some non-metallic valves, using socket connections, and so on. Valve users should be treated according to specific conditions.

 

Send Inquiry