With the increasing use of valves in various industries, electric valves are widely used in chemical industry, water supply and other industries. Of course, various problems will also be encountered during use, such as water leakage, water seepage, switches not in place, and manual inability to use , motor becomes hot, etc. Among them, many customers have encountered the problem of motor heating. If it is solved properly, it can be done in a few minutes. If it is not solved properly, the motor will burn out and the loss will be huge. Let me introduce to you the heating problem of valve electric actuator.

A motor that is working normally will generate some heat. Especially in situations where switching is frequent. Therefore, slight motor heating is not a problem. If the body temperature is obviously higher than normal when touched, and the temperature does not drop after the valve has been in a stagnant state for several minutes, then this is abnormal and needs to be solved as soon as possible.
1. Find the reason: The reason why the motor heats up abnormally or hot is because the motor is in action for a long time and cannot effectively dissipate heat. Therefore, when we find that the motor is hot, we can use an electric pen to test whether there is current in the motor. If there is current, it means that the motor is working, which is the reason why the motor is hot.
2. After confirming that the motor is always working, the next step is to find the cause of the problem and what causes the motor to not stop working. Electric valves generally have mechanical and electronic double limits. Under normal circumstances, the electronic limit will first stick to the main position. The mechanical limit plays an auxiliary role.
3. We need to first determine whether there are any debris in the medium in the pipeline, and whether the valve does not have a full-circulation sealing structure. When the valve is fully open, the valve plate is still in the pipeline. If weeds, sticks, etc. in the medium block the valve plate. If the valve cannot move to the fully open position, the electronic limiter cannot stop the motor, which will cause the motor to become hot.
4. If it is confirmed that the medium has no impurities, it is most likely caused by the mismatch between the mechanical limit and the electronic limit. Generally, after the motor stops working due to the interference of the electronic limit, it is still some distance away from the mechanical limit. If the electronic limit fails, the valve will get stuck at the mechanical limit, which will also cause the motor to work continuously. Causes fever. At this time, it is necessary to open the cover and check whether the stopper of the micro switch responsible for the electronic limit has slipped or deviated from the original debugging position. Adjusting it to the normal position will solve the problem.
5. There is another reason that can also cause the motor to heat up: the torque of the mounted electric actuator is too small, causing the motor to overload. This requires replacing a larger torque motor to solve the problem.





