Contact Us

  • Room 607-2, Building 5, Wanda Plaza, No.1188, Yongding Road, Yongzhong Street, Longwan, Wenzhou, Zhejiang, China
  • heyuevalveactuator@gmail.com
  • +86-13486831323

Common faults of electric ball valves

May 05, 2023

Type: Electric ball valve typical failure, safety valve, stem between the spring and a mounted in the actuator in its door valve reciprocating urge the position of one of the gates, this may be a closed body, the control fluid applied to the piston in the dry actuator to overcome the spring force, thus maintaining in other positions is usually open, so as a control condition for a long time, when this structure valve is abandoned at a large depth, and the body pressure is much lower than the pressure drop around the sea surface, the electric ball valve spring must be large enough, The force of closing the valve is not enough to move the door due to the pressure of the body, and its failed position. It can happen in extreme cases. This reduces the size of the actuator and increases the depth rating of the valve.


Troubleshooting method: Failure by electric ball valve, which includes a traditional valve in this category, the valve body has a cavity that passes through the structure and a cavity intersecting door, opens and closes between the cavities, and is responsible for moving these positions between the actuators. Since it is also the case with this type of valve, the actuator consists of an engine hood mounted on the valve body with the stem connected to an additional valve.

 

Send Inquiry